Description Chain conveyor
A chain conveyor is a robust conveyor system for moving bulk goods. Chain conveyors use a chain with elongated scrapers, two drive shafts and a motor that sets the whole machine in motion. The scrapers pull the product across the bottom of the trough. The conveyor is used to transport bulk goods both horizontally and vertically.
Chain conveyor | JHK25/26 | JHK25/39 | JHK25/50 | JHK35/39 | JHK35/50 | JHK35/60 |
inner trough width | 280 | 410 | 520 | 420 | 530 | 630 |
outer trough width | 380 | 510 | 650 | 526 | 620 | 736 |
total height of trough | 450 | 450 | 450 | 576 | 576 | 576 |
length tightening and drive unit | 833 | 833 | 833 | 833 | 833 | 833 |
capacity (m³/hr at v = 0,5 m/s) | 119 | 179 | 229 | 248 | 318 | 380 |
all sizes in mm |
Advantages chain conveyor
- Suitable for horizontal and vertical transport
- Long lifespan
- Can be used for short and long distances
- Completely enclosed and therefore dust-free
- Low maintenance and reliable
- Can be equipped with various inlets and outlets with (pneumatic) slides so that discharge can take place at different locations
Options chain conveyor
We design, make and install chain conveyors according to your wishes. With more than 100 years of experience, no challenge is too big. Below are a number of options for chain conveyors:
Chain and trough
- Number and type of carriers depending on product and feed angle
- With sweeping strips for self-cleaning
- (Breakage) strength depending on power and speed
- Return cups welded to the chain for good cleaning effect up to the end of the trough
- Trough with plastic bottom or wear strip
- Materials for trough and chain optionally St.37, SS, manganese steel etc.
- Tensioning by adjustable shaft of reversing wheel
Inlet and outlet
- Inlet directly or with capacity control slider and intermediate floor
- Various versions (manual, electro-pneumatic, electric)
Versions
- With intermediate floor for bi-directional transport
- Arrangement for speed monitor on the reversing wheel
- Overflow protection